FEATURES:
High density triple weave braiding with Aluminium foil, can be used in high temperature
triple shielding for maximum rejection of EMI and RFI interference for superior clarity
3D Compatible
Supports All HDMI v2.0 Features (Complete Backward Compatible with v1.4a and v1.4b)
Supports Audio Return Channel (ARC) & HDMI Ethernet Channel (HEC)
Dolby True HD & DTS-HD Audio Capable
Type: Standard HDMI Type A to Type A (19 Pin Male to Male) with 19 copper wire cores.
Full HD Resolution: from 1080p, 1080i, up to 4096 x 2160 pixels
Also suitable for lower resolutions such as 480p, 480i and 720p
Conductors: 28AWG 99.99% Oxygen Free Copper Conductors for maximum conductivity and reliability
Transfer Rate/ bandwidth : 18Gbps

What is HDMI 2.0?
HDMI 2.0, which is backwards compatible with earlier versions of the HDMI specification, significantly increases bandwidth up to 18Gbps and adds key enhancements to support market requirements for enhancing the consumer video and audio experience.

What?s new in HDMI 2.0?
HDMI 2.0 significantly increases bandwidth to 18Gbps and includes the following advanced features:

Resolutions up to 4K@50/60 (2160p), which is 4 times the clarity of 1080p/60 video resolution, for the ultimate video experience
Up to 32 audio channels for a multi-dimensional immersive audio experience
Up to 1536kHz audio sample frequency for the highest audio fidelity
Simultaneous delivery of dual video streams to multiple users on the same screen
Simultaneous delivery of multi-stream audio to multiple users (Up to 4)
Support for the wide angle theatrical 21:9 video aspect ratio
Dynamic synchronization of video and audio streams
CEC extensions provide more expanded command and control of consumer electronics devices through a single control point

Does HDMI 2.0 replace HDMI 1.x?
No, HDMI 2.0 is built on top of HDMI 1.x and any device that wants to implement HDMI 2.0 must first implement HDMI 1.x as a baseline requirement.

Can existing HDMI cables support the higher bandwidths of HDMI 2.0 Specification?
Yes, existing High Speed HDMI Cables (wire only) will support the new higher bandwidths (up to 18Gbps).
HDMI 2.0 specification defined a new, more efficient signalling method, for speeds above 1.4b limits (10.2Gbps), to allow higher bandwidths (up to 18Gbps) over existing High Speed HDMI Wire Cables.

Does HDMI 2.0 support BT.2020 (rec.2020) colorimetry?
Yes. HDMI 2.0 includes support for BT.2020 Colorimetry with 10 or more bits of color depth.
Video Formats defined in BT.2020 and supported by HDMI 2.0 specification:
? 2160p, 10/12 bits, 24/25/30Hz, RGB/4:2:2/4:4:4
? 2160p, 10/12 bits, 50/60Hz, 4:2:0/4:2:2

Is HDMI 2.0 backwards compatible with HDMI 1.x?
Yes, all HDMI versions are fully backward compatible with all previous versions.

Does HDMI 2.0 require new connectors?
No, HDMI 2.0 uses the existing connectors.

Does HDMI 2.0 require new cables?
No, HDMI 2.0 features will work with existing HDMI cables. Higher bandwidth features, such as 4K@50/60 (2160p) video formats, will require existing High Speed HDMI cables (Category 2 cables).

Can my existing HDMI 1.x devices be upgraded with HDMI 2.0 features?
Currently, there are no provisions for doing such an upgrade. Because of the new enhanced feature set, any such conversion would require hardware and/or firmware upgrades. If there are such conversions, it would come from the manufacturer. Please check with them directly.

Where can I learn more about HDMI 2.0?
Please visit the HDMI.org website at the following address: http://www.hdmi.org